Access panel 800×1000 mm

The 800×1000 mm / 80×100 cm / 1000×800 mm / 100×80 cm format is one of our catalogue sizes for the access panel range, available in several variants depending on the application: integration in a plasterboard wall, installation in a suspended ceiling, damp areas, or rooms with fire-rating requirements. Suitable for access to server racks, compact air handling units, vertical hot water cylinders.

Access panel 1000×800 mm installed sideways

The rectangular 800×1000 mm format can be installed in two orientations depending on the application: horizontal (800 mm wide by 1000 mm high), typical of a suspended ceiling or upstand; or vertical (1000 mm by 800 mm), typical of a service-shaft partition. The opening direction (hinge on the top, bottom, left or right edge) is set at the time of order to suit the access route required.

Access panel 800×1000 mm for plasterboard and walls

The plasterboard range in the 800×1000 mm (80×100 cm) format is designed for integration into a plasterboard wall or a standard dry-lining partition. The white powder-coated galvanised steel frame (RAL 9016) is surface-mounted onto the board; the door leaf itself receives a plasterboard insert, which makes the access panel virtually invisible once painted in with the surrounding wall.

Models available in 800×1000 mm

• Tempo Eco Green Plasterboard Access Panel – Push Latch
• Tempo Eco Star Plasterboard Access Panel – Square Key Lock
• Tempo Eco Star Plasterboard Access Panel – Cylinder Lock
• Tempo Eco Star Plasterboard Access Panel – Push Latch

Access panel 80×100 cm for ceilings

Fitted horizontally into a suspended ceiling, the 800×1000 mm (80×100 cm) access panel provides entry to building services that are often bulky: a compact AHU, a server rack, a loft hatch opening. A 90-degree opening stay is supplied as standard with the ceiling-rated ranges.

Hinging, Opening Stay and Orientation

For a horizontal installation, the opening direction (hinge on the top, bottom, left or right edge) must be specified at the time of order. Every ceiling variant is supplied with a stay mechanism that holds the leaf open for the duration of the intervention, so it cannot fall onto the operative.

Steel access panel 800×1000 mm

Where appearance is secondary (plantroom, basement, car park, building services areas), the bare metal version is faster to install and remains keenly priced. Three families are available in 800×1000 mm (80×100 cm):

Made to measure access panels

The 800×1000 mm (80×100 cm) format is part of our standard catalogue sizes. For neighbouring formats, see our other available sizes — every dimension is declined as standard from 200×200 mm up to 1200×1200 mm for the broadest ranges (metal and plasterboard).

Not every variant is held in stock for this format: solid wall, airtight, fire-rated, for tiling, ventilated versions are not part of the standard 800×1000 mm (80×100 cm) offering. If the project requires one of them, please get in touch for a bespoke quotation — most ranges can be adapted to special sizes with an indicative lead time of around three weeks.

Frequently asked questions about the 800×1000 mm access panel

Why choose a rectangular format such as 800×1000 mm?

A rectangular 800×1000 mm (80×100 cm) is preferred when the equipment to be reached is itself elongated: an MVHR unit, a server rack, a horizontal water cylinder. The equivalent square (same area but in 1000×1000) would force a larger cut into the partition than is actually needed.

What is the difference between the plasterboard version and the solid-wall version in 800×1000 mm?

The plasterboard access panel uses a lightweight frame designed to integrate into 12.5 mm plasterboard. The solid-wall version reinforces the frame to take fixing loads on heavy substrates (brick, concrete, blockwork) and minimises hairline cracking around the perimeter render — it is suited to refurbishment and traditional construction.

Can the 800×1000 mm format be manufactured to a bespoke specification?

Yes — every range can be adapted to specific dimensions (wall thickness, frame depth, special finish, round shape). The typical lead time for bespoke manufacture is around three weeks. For neighbouring sizes of 800×1000 mm (80×100 cm), see our standard catalogue dimensions.